Equil
TM
Insulin Patch Pump System
101
15 Suspend/Resume
15.1 How to Suspend/Resume
Occasionally, you may need to
temporarily stop insulin delivery by using
the Suspend function. This can happen, for
instance, if you temporarily do not require
any insulin infusion, or need to remove the
pump from the infusion set.
From the Home Screen, choose the
Suspend button to temporarily stop insulin
delivery.A confirmation dialog box opens,
as shown in Figure 118, click OK to suspend
or Cancel.
You can also choose to stop delivery and
allow th
e pump to rewind. Remember that
rewinding the pump will require priming
the reservoir again.
Figure 118
After Suspend mode has been activated,
the PDA returns to the Home Screen, and
the information area of the Home Screen
will display the amount of time that insulin
delivery has stopped for. The Pause button
will become a Resume button, as shown in
Figure 119.
While in Suspend mode, the PDA will
beep every 15 minutes to remind you
that delivery has stopped.
Note
To Next Page
Loading...