Equil
TM
Insulin Patch Pump System
9 Replacing the Reservoir
9.1 Setup
1
Warning
！
Before continuing, please make
sure you are familiar with frequently
used pump setup operations such as
installing/removing an infusion set,
filling a new reservoir, and assembling/
disassembling the reservoir (Section 7).
If the insulin reservoir connected to your
pump is empty, you should replace the
reservoir.
infusion set as shown in Figure 79. Press
you should remove and replace the
infusion set (Section 7.1-7.2) and prepare a
new insulin reservoir (Section 7.3).
To Next Page
Loading...