Equil
TM
Insulin Patch Pump System
81
outside of the range printed on the test
vial (or foil pouch), there may be a problem
with your meter. Please contact your
supplier.
Control Solution 1 is sufficient for most
self testing needs. If you think the PDA or
strips may not be working correctly, you
may also want to do a level 2 test. Repeat
the above steps using Control Solution
2, see if the results fall within the CTRL2
(Control fluid 2) range printed on the
label. For confirmation of results, Control
Solution 1 tests should fall within the
CTRL1 range, and Control Solut
ion 2 tests
should fall within the CTRL2 range.
10.9 Entering Your Glucose
Reading Manually
You can also enter your blood glucose
reading manually. This is especially useful
if you use a separate blood glucose meter.
The entry will be stored in your history and
can be used with the bolus calculator.
From the Home Screen, choose the
Actions button and then the Enter BG
Reading Manually button to enter the
manual entry screen (Figure 101). Using the
“+” and “-” buttons, enter your blood
glucose reading
, select the appropriate
tag (Before/After exercise, Before/After
meal), and press Save. Now press the Back
button to exit this screen.
After a reading is saved into history, it
cannot be modified.
If you would like to enter another BG
result, exit by pressing the Back button
and re-enter the Enter BG Reading
Manually screen.
Note
If the Bolus Calculator is enabled in
the Settings Menu, the button will turn
green after a blood glucose reading has
been recorded. See Section 11
Note
To Next Page
Loading...