EQUIL MTM-I - Page 50

Equil
TM
Insulin Patch Pump System
45
a beep from the PDA to confirm that you
have pressed the button. Each time you
press the button, the tone will ascend in
pitch (up to 5, and then repeating) to help
you remember the number of times you
have pressed the button.
3
After you have set the correct bolus
amount by pressing the Enter (Select)
button the appropriate number of times,
wait for 3 seconds and the PDA will repeat
the audible tones back to you to confirm
the correct number of bolus increments.
If the number of tones is correct, press the
Enter (Select
) button one last time, and the
bolus will be administered.
When the pump receives the bolus
correctly, you will hear a confirmation
tone and the bolus will start. The PDA will
automatically return to the main screen,
displaying the bolus and time remaining.
6.5.2 Quick Bolus Using the Pump
Administering a Quick Bolus on the
pump is similar to administering a Quick
Bolus on the PDA.
1
Press and hold the Bolus button on the
patch pump. The pump will give an audible
alert which indicates that you can enter a
quick b
olus amount.
2
With each subsequent button press, the
bolus size will increase by a predetermined
increment. This increment can be set
The maximum number of increments
for a quick bolus is 20.
Note
If there is no activity for 10 seconds,
the PDA will revert to the Lock Screen.
Note
If you would like to cancel, simply
press the Back button or wait 10
seconds for the system to revert to the
lock screen
Note