Equil
TM
Insulin Patch Pump System
79
contact with the test strip.
Figure 99
2
When enough control solution has
been applied, the screen will count down
5 seconds and then display the test result
as in Figure 100. The result is displayed in
the top half of the screen. If the result falls
within the range printed on the test strip
package (typically CTRL1) the device is
working properly.
If a big bubble forms, wipe with
clean cotton wool, and then do the
following: If the test window is not full,
do not add more solution. Discard and
try again with a new strip.
Note
To Next Page
Loading...