Ericsson MINI-LINK 6351 - Installing a MINI-LINK; Outdoor Cabling

Installing a MINI-LINK 6351
Tool Dimension or type
Extended T-handle 6 mm hex key LSB 903 36
Torx screwdriver TX 10 (M3), TX 20 (M4), and TX 25
(M5)
Torque wrench 13 mm, and 16 mm
Torque wrench with socket 13 mm, 16 mm, and 18 mm
Torque wrench with hex insert 5 mm and 6 mm
Digital multimeter with standard test
probes (2 mm diameter)
Lubricating substance For example: Molykote DX
(1)
For outdoor screws and nuts
(1) Manufacturer: Molykote, Dow Corning GmbH, Pelkovenstrasse 152, D-8000 Munich 50,
Germany
LSB 903 36
8650
Figure 3 Extended T-handle Hex Key
3.3.2 Outdoor Cabling
Table 3 Tools
Tool Dimension or type
Hex key 4 mm (M4)
Torque wrench with socket 16 mm and 18 mm
Torque wrench with hex insert
6mm
Cable clamp pliers LSD 349 20
(1)
Cable jacket cutter LTX 102 17
Knife
Cutting pliers
Digital multimeter with standard test
probes (2 mm diameter)
(1) Only required if metal straps are used when clamping the cables
6 13/1531-HRA 901 17/9 Uen B | 2016-03-04