Preparing for Installation
3 Preparing for Installation
This section contains information on tools and equipment necessary for the
outdoor installation. It also gives an overview of units and accessories.
3.1 Power Supply Requirements
MINI-LINK 6351 has a IEEE 802.3at compatible PoE interface. The chassis is
connected to the cable shield.
For more information, see Technical Description.
3.2 Temperature Requirements
The equipment operates according to the following constraints:
• Continuous Conditions (Normal Operation)
0
Temperature:
0
33
C to +55
C(
0
27
F to +131
F)
Measure outdoor temperature in an open, unshielded area, preferably
close to the radio. The sensor must be protected from the sun.
Minimum distance to other objects is 50 cm.
0
Relative Humidity: 8–100%
• Exceptional Conditions (Safe Function)
0
Temperature:
0
45
C to +60
C(
0
49
F to +140
F)
Measure outdoor temperature in an open, unshielded area, preferably
close to the radio. The sensor must be protected from the sun.
Minimum distance to other objects is 50 cm.
3.3 Required HW Tools
3.3.1 Outdoor Installation
Table 2 Tools
Tool Dimension or type
Metric combination wrench 10 mm, 13 mm, and 16 mm
Hex key 2.5 mm (M3) and 4 mm (M4)
513/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
