Ericsson MINI-LINK 6351 - Strap Holes View; To Clamp the Poe Cable

Installing the MINI-LINK 6351
A
C
B
Figure 14 Strap Holes
To clamp the PoE cable:
1. Keeping the cable straight and untwisted, place it in cable clamps at 1
m intervals.
1 m1 m1 m 1 m
1 m
1 m
1 m
2. If a single clamp is used per cable section:
If the clamp is fitted vertically, fasten the clamp with two straps and tighten
the straps by hand. If the clamp is fitted horizontally on the mast, fasten it
with one strap.
33
13/1531-HRA 901 17/9 Uen B | 2016-03-04