Ericsson MINI-LINK 6351 - Default Chapter; Table of Contents

Contents
Contents
1 Overview of Installing a MINI-LINK 6351 1
2 Safety Information 3
3 Preparing for Installation 5
3.1 Power Supply Requirements 5
3.2 Temperature Requirements 5
3.3 Required HW Tools 5
3.4 Required Units and Accessories 8
3.5 Installing the MINI-LINK Alignment App 11
4 Installing the RMM 13
5 Installing the MINI-LINK 6351 17
5.1 Assembling the MINI-LINK 6351 17
5.2 Installing the MINI-LINK 6351 on a Wall 19
5.3 Installing the MINI-LINK 6351 in a Mast 22
5.4 Installing PoE Equipment and Cable 26
6 Performing an Initial Setup 41
7 Aligning the Antenna 43
7.1 Preparing for Antenna Alignment 43
7.2 Aligning the Antenna Using the Alignment Camera 43
7.3 Optimizing the Antenna Alignment 52
Reference List 57
13/1531-HRA 901 17/9 Uen B | 2016-03-04