Preparing for Installation
15738
LSD 319 90
LTX 102 17
LSD 349 20
Figure 4 Example of Outdoor Cabling Tools
Table 4 shows the tools required for installation of the Power Over Ethernet
(PoE) cable:
Table 4 PoE Installation Tools
Tool Dimension or Type
Torque wrench with bit TX 10
Torque wrench with socket
16 mm
Wrench
20 mm
Cutting pliers
–
Knife
–
Crosshead screwdriver (Phillips or
Pozidrive)
–
Accessories/Cable Boot, Black 1/RPV310907
(1)
Connector/RJ45 Plug RPV310907/01
(2)
Telegärtner Crimp Tool N00001A0002
(3)
(4)
Slotted screwdriver Dimension 2.5 ± 0.5 mm
(1) Only required if connecting the MINI-LINK 6351 to a PoE injector
(2) Only required if connecting the MINI-LINK 6351 to a PoE injector
(3) Only required if connecting the MINI-LINK 6351 to a PoE injector
(4) Manufacturer: Telegärtner Karl Gärtner GmbH · Postfach 1132 · D-71140 Steinenbronn,
Germany
3.3.3 Functional Test
See Verifying an Installation for the required equipment.
7
13/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
