Ericsson MINI-LINK 6351 - An Assembled Earthing Kit View

Installing a MINI-LINK 6351
Caution!
Install the earthing kit only where the cable runs straight.
A
C
B
8744
Figure 15 An Assembled Earthing Kit
Description
A
Earthing kit body
B
PoE cable
C
Earthing cable
Note: The temperature of the butyl sealing compound must not be below
–20

C (–4

F) during installation.
Grounding Procedure
Caution!
Make sure to strip the PoE cable at the specified dimension and center the
earthing kit over the stripped part due to risk for leakage.
1. Strip 20 ± 2 mm (3/4 ± 1/16") of the PoE cable at the desired grounding
point. Use an appropriate tool, for example, a cable jacket cutter.
36
13/1531-HRA 901 17/9 Uen B | 2016-03-04