Ericsson MINI-LINK 6351 - Page 41

Installing the MINI-LINK 6351
Note: Be careful not to damage the shield D.
D
20 ± 2 mm
(3/4 ± 1/16")
L TX 102 1 7
8691
2. Remove the covering paper from the butyl sealing compound E. Wrap the
earthing kit body A around the stripped part of the cable.
A
E
3. Make sure the butyl sealing compound inside the earthing kit body is
positioned on the outer jacket.
4. Connect the earthing cable C to the earthing kit body. Press the earthing kit
body together and tighten the screws.
Note: Make sure the screws enter the tapped holes straight.
37
13/1531-HRA 901 17/9 Uen B | 2016-03-04