Installing a MINI-LINK 6351
3.4 Required Units and Accessories
3.4.1 Unit Identification
A
Figure 5 Product Label Position
The label A on the unit is used for product identification. It is positioned on the
cardboard box and on the unit. For example, the label contains the following
information:
• Product number (ordering code)
• Index number
• Revision state
• Manufacturing date
Check the product number on the labels and compare them with the installation
data from the design department to make sure you have received the correct
equipment.
8
13/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
