Ericsson MINI-LINK 6351 - Connecting the Poe Cable to the MINI-LINK; Installing the Ethernet Surge Protector

Installing a MINI-LINK 6351
5.4.4 Installing the Ethernet Surge Protector
If not using an Ethernet surge protector, continue with connecting the PoE
cable to the MINI-LINK 6351.
Mount and ground the Ethernet surge protector by following the installation
instruction enclosed in the surge protector delivery.
5.4.5 Connecting the PoE Cable to the MINI-LINK 6351
1. Push the PoE cable connector onto the PoE port.
2. Twist the shell clockwise until it locks into place with a click.
30
13/1531-HRA 901 17/9 Uen B | 2016-03-04