Overview of Installing a MINI-LINK 6351
1 Overview of Installing a MINI-LINK 6351
A MINI-LINK 6351 can be installed on a wall or in a mast. Traffic and power are
provided through a single cable using Power over Ethernet (PoE).
Note: If you configure the packet radio using a script on the RMM, and that
script turns on the transmitter, do not connect the packet radio to power
until after mounting the packet radio and aligning it visually.
PoE cable
Packet radio
PoE injector
Power cable
Ethernet cable
Figure 1 System Overview
Connectors
All connectors are at the back of the MINI-LINK 6351.
1
13/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
