Installing a MINI-LINK 6351
3. If more than one clamp (stacking) is used per cable section:
a. Insert the bolt that is included in the stacking kit through the first
clamp, fit the clamp to the mast and tighten the straps by hand.
Stack the other clamps and secure the clamps with a nut.
b. If metal straps are used, position the pliers on the strap and
squeeze the handles 1 to tighten the straps.
34
13/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
