2928
7 Tap the Next button.
8 The Add Start Time screen appears. Tap the Up arrow
or Down arrow to set the hour, minute, and AM or PM
setting.
9 Tap the Next button. The Add CMV screen appears.
10 Tap the Next button to confirm the CMV.
Note: You have the option to tap the Edit icon if a CMV
change is needed.
11 Enter your location in the Add Location field.
Note: This is pre-populated with the current location, but might
require correction.
12 Tap the Next button. The Add Remark screen appears.
13 Enter your reason for inserting the record in the Add
Remark field.
14 Tap the Done button.
15 Tap the Agree button if you are ready to certify or tap
the Not Ready button. The Logs screen appears with
a confirmation message.
3.7.4 Editing an existing record
You can tap the Edit icon to correct an existing record.
1 Complete the steps in 3.7Correcting logs.
2 Tap the Edit icon. The Edit Status screen appears. The
EROAD ELD allows you to proceed through the Edit wizard
to access the following screens: Edit Duty Status, Edit Start
Time, Edit CMV, Edit Location, and Add a Remark, in this
order.
Note
You must add a remark when editing your logs
to explain the reason for the edit.
To Next Page
Loading...
