EROAD ELD - Roadside Inspection Procedures; Transferring Records

3130
3.8 Certifying your logs
It is best to certify your logs at the end of each trip.
1 Tap the Logs icon on the Home screen.
2 Tap the Certify icon on the Logs screen. The Certify
screen displays.
(Optional) Tap a check box (date) only on the Certify screen
if you want to disable it because you are not ready to certify
that date.
3 Tap the Continue button. A confirmation message
appears for the selected dates.
4 Tap the Agree button if you are ready to certify those
logs or tap the Not Ready button if you need to edit
something else. Ensure that your log is true and correct
before you certify. A Certification Successful message
appears on screen.
3.9 Finishing your day / Logging out
You need to log out when you finish your day to prevent
another driver from accessing your logs.
1 Tap the Driver icon on the Home screen.
2 Tap the Logout icon. The EROAD ELD prompts you to
certify your logs if they are uncertified.
Caution
Be careful if you use a kill switch. Change
your duty status to OFF, logout, then wait
10seconds for logs to sync before using
the killswitch. Otherwise, you might stay in
Drivingstatus overnight.