ESAB A2 PEK - 8.3 Recall and Delete Data

8 MEMORY MANAGEMENT
0460 949 474
- 34 -
© ESAB AB 2021
WELD DATA MEMORY
5 - (SAW)



SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
STORE RECALL DELETE 2ND FUNCT QUIT
Parts of the content of weld data set number 5 are presented at the bottom of the display.
If a data set is already stored in the selected location, you will be asked if you want to
overwrite that set or not, YES or NO.
WELD DATA MEMORY
5 - (SAW)



SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
NO YES
OVERWRITE DATA SET5 IN MEMORY?
Return to the memory menu using NO.
8.3 Recall
We are going to recall a stored data set:
Mark the row using the positioning knob. Press RECALL.
WELD DATA MEMORY
5 - (SAW)



SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
STORE RECALL DELETE 2ND FUNCT QUIT
Press YES to confirm that you want to recall data set number 5.