8 MEMORY MANAGEMENT
0460 949 474
- 38 -
© ESAB AB 2021
WELD DATA MEMORY
5 - (SAW)
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
STORE RECALL DELETE 2ND FUNCT QUIT
Part of the main menu is displayed and the menu shows the symbol which means that
you are in an editing mode.
Press SET and make the relevant changes.
SAW
REGULATION TYPE
WIRE TYPE
WIRE DIMENSION
CA
SS FLUX CORED
2.0 mm
SET QUIT
The following menu appears:
In this example we change the welding current from 400 A to 500 A.
Select the welding current and scroll through to 500 using one of the settings knobs.
Press QUIT twice.
SAW WELD DATA SETTING
VOLTAGE
CURRENT
TRAVEL SPEED
DIRECTION
START DATA►
STOP DATA►
DYNAMIC REGULATION
SETTING LIMIT►
MEASURE LIMITS►
20.0 V
500 A
0 cm/min
■
AUTO
QUIT
The setting for weld data number 5 has now been edited and stored.
To Next Page
Loading...
