Manual 0463 413 001 OPERATION 3-1
3 OPERATION
3.01 General
General safety regulations for handling the equipment can be found in the "1 SAFETY PRECAUTIONS" chapter
of this manual. Read it through before you start using the equipment!
NOTE!
When moving the equipment use intended handle. Never pull on the cables.
WARNING
Rotating parts can cause injury, take great care.
WARNING
Electric shock! Do not touch the workpiece or the welding head during opera-
tion!
Icon Reference Guide
Home
Spot time on/o selection
Information
MIG Gun Spot time on adjustment
Parameters
Flux cored
Parameters Manual MIG
Percent
MMA
Postflow The time the
shielding gas stays on after
the welding arc is stopped
Smart MIG
Preflow The time the
shielding gas stays on
before the welding arc is
started
TIG
%
To Next Page
