ESAB EMP 215ic - Wire Feeder Replacement Parts CE Systems

ESAB EMS215IC/EMP215IC
Manual 0463 413 001 REPLACEMENT PARTS 8-7
8.07 Wire Feeder Replacement Parts CE Systems
6
4
8
3
7
5
1
2
8
Item Ordering no. Description Wire type Wire dimensions
1
0558 102 460 Wire outlet guide MS/SS/Flux
Cored
0.8 mm / 0.9 mm / 1.2 mm
(0.030” / 0.035” / 0.045”)
0558 102 461 Wire outlet guide MS/SS/Flux
Cored
0.6 mm (0.023”)
2
0558 102 328 Wire inlet guide MS/SS/Flux
Cored
0.6 mm / 0.8 mm / 0.9 mm / 1.2 mm
(0.023” / 0.030” / 0.035” / 0.045”)
3 0558 102 457 Key-drive shaft N/A N/A
4
0367 556 001 Feed roll “V” groove Fe/SS/Flux
Cored
0.6 mm / 0.8 mm (0.023” / 0.030”)
0367 556 002 Feed roll “V” groove Fe/SS/Flux
Cored
0.8 mm / 0.9 mm (0.030” / 0.035”)
0367 556 003 Feed roll “V” knurled Fe/SS/Flux
Cored
1.0 mm / 1.2 mm (0.040” / 0.045”)
0367 556 004 Feed roll "V" groove
not knurled
Aluminium 1.0 mm / 1.2 mm (0.040” / 0.045”)
5 0558 102 329 Locking knob N/A N/A
6
0558 102 331 Pressure arm complete
assembly
N/A N/A
7 0558 102 330 Screw N/A N/A
8
0558 102 459 Euro Adapter Locating
Screw
N/A N/A