ESAB PCM-875A - Installation and Service Safety

SECTION 1 PCM-875A Mechanized Plasma Cutting System SAFETY
1-4
WARNING
!
Failure to follow safety warning label
instructions could result in death or
serious injury.
Read and understand all safety warning labels on
machine.
Refer to operator’s manual for additional safety
information.
1.4 Installation Precautions
WARNING
!
Improperly Installed Equipment Can
Cause Injury Or Death.
Follow these guidelines while installing machine:
· Contact your ESAB representative before
installation. He can suggest certain
precautions regarding piping installation and
machine lifting, etc. to ensure maximum
security.
· Never attempt any machine modifications or
apparatus additions without first consulting a
qualified ESAB representative.
· Observe machine clearance requirements for
proper operation and personnel safety.
· Always have qualified personnel perform
installation, troubleshooting and maintenance
of this equipment.
· Provide a wall mounted disconnect switch with
proper fuse sizes close to the power supply.