SECTION 2 PCM-875A Mechanized Plasma Cutting System Description
2-4
2.4 PT-20AMX
The patented PT-20AMX is a 100 amp capacity,
pilot-arc mechanized torch available in 3 different
torch lead length packages.
The torch uses clean, dry air as the cut gas for
cutting carbon steel, aluminum, or stainless steel.
PT-20AMX Torch with 1,2 m lead P/N 0558002632
PT-20AMX Torch with 5,7 m lead P/N 0558002633
PT-20AMX Torch with 7,6 m lead P/N 0558003381
WARNING
!
DO NOT use oxygen with this torch!
A hazardous fire may result.
2.4.1 Technical Specifications
Type: Air Cooled, single gas at 9,9 kl/hr
Rating: 100 Amperes at 100% Duty Cycle
Gas Purity: Air: Needs to be clean, dry and free of all particulate matter.
Nitrogen: 99.995% clean
Gs Type: Air, nitrogen
To Next Page
Loading...
