SECTION 5 PCM-875A Plasmarc Cutting System Maintenance
5-1
5.1 PCM-875A Console
5.1.1 General
CAUTION
!
Stop work immediately if this equipment
does not operate properly. Equipment
damage or personal injury may result.
CAUTION
!
Do not permit untrained persons to
inspect, clean, or repair this equipment.
Maintenance must be performed by
specially trained personnel.
NOTICE
Use of replacement parts other than ESAB
replacement parts may void warranty.
WARNING
!
Electric Shock Can Kill!
Disconnect wall switch before inspection
and maintenance of the power console.
To Next Page
Loading...
