1.
2.
3.
4.
5.
b. Jobs and working modes
Jobs
A job consists in all the actions to be carried out to produce a pair of glasses. It can be managed in two ways:
Saved job: allocating an (ID) and a reference to the job makes it possible to save it and subsequently re-use it.ID
(p.148)
Automatic job archiving
Mandatory in the tracing - tracing work mode
Without saving: working in current mode (job identification by the letter A) enables you to process a job quickly without saving
it.
The job processing cycle must be finished before starting another.
If the cycle is stopped, a warning message is displayed and it is recommended to save the job.
Working modes
There are two working modes for managing your jobs:
The tracing-centering mode (by default)
The tracing-tracing mode
The selected work mode is shown in the information bar, to the left of the Essilor logo. You can change it in the tracer settings.
Working in the tracing - centering mode
After tracing, the tracer automatically displays the centering screen.
You can fully process a job before proceeding to the following:
Tracing or recovering a job from the database
Changing the shape and drilling position if necessary
Centering
Lens blocking
Lens edging
Working in the tracing - tracing mode
After tracing, the tracer displays the tracing screen again.
You can carry out several tracings in succession.
The tracings are saved with the job number you have allocated to them.
The shape modification, positioning of the drilling points, centering, blocking and edging of the lenses are handled
subsequently.
All jobs must be saved.
You can access the centering screen at any moment to centre the lens that corresponds to the active shape:
> Select then .
c. Displaying the binocular view
Once the tracing is finished, you can display a binocular representation of the job on a 1:1 scale, in order to check the frame shape
and centering.
Three values are displayed above the image:
the frame base
(p.148)
thecurve angle
(p.148)
the frame thickness
This symbol indicates the view from the wearer side.
To Next Page
Loading...
Need help?
General
