Essilor Neksia - User Manual

User Manual

Summary

I. FIRST STEPS WITH NEKSIA

2. Connection to an Edger

3. Using the Tracer-Centerer-Blocker

Information on turning the device on/off, using touch screen and keypads.

II. TRACING

1. The Tracing Environment

2. Shape Management and Storage

3. Tracing a Rimmed Frame

Procedure for tracing rimmed frames, including high-base frames.

4. Tracing a High-Base Frame (Option)

5. Tracing a Pattern, Demo Lens or Recut Lens

III. CENTERING

1. Centering Environment

2. Centering a Single Vision Lens

Procedures for centering single vision lenses.

3. Centering a Progressive Lens

Procedures for centering progressive lenses.

4. Centering Bifocal; Trifocal Lenses

Procedure for centering bifocal or trifocal lenses.

5. Centering an Executive Lens

Procedure for centering an executive lens.

6. Centering a Mid-Distance Lens

Procedures for centering mid-distance lenses.

7. Centering for a High-Base Frame

8. Blocking a Lens

Procedures for lens blocking based on selected option.

IV. MODIFYING THE LENS SHAPE

2. Modifying a Shape

Functions for simple modifications, free-form, and retouching.

3. Archiving; Saving a Shape

V. PREPARING A DRILLED JOB

2. Configuring a Drilling Point

Procedures for creating, deleting, and dimensioning drilling points.

3. Drilling Models

VI. PREPARING LENS EDGING

2. Edging Configuration

VII. TRACER-CENTERER-BLOCKER CONFIGURATION

1. Configure the Tracer-Centerer-Blocker

2. Customize the Tracer-Centerer-Blocker

Customizes working modes, display precision, decentration, action bar, and brightness.

3. Restoring the Factory Settings

VIII. MAINTENANCE & SERVICING

1. Carrying Out the Autotests

2. Check and Calibrate (Remote Lens Edging Option)

3. Make a Backup of the Jobs and Display Configuration

5. Maintain and Clean the Tracer-Centerer-Blocker

GENERAL INFORMATION

6. Safety Instructions

Essential safety precautions for operation, maintenance, and electrical safety.

Essilor Neksia Specifications

General

Category	Edger
Manufacturer	Essilor
Model	Neksia
Maximum Lens Diameter	80 mm
Type	Automatic Edger
Beveling	Automatic beveling with multiple bevel types
Grooving	Yes
Lens Material Compatibility	polycarbonate, high-index, Trivex
Bevel Position Adjustment	Automatic
Power Supply	230V, 50/60 Hz
Grinding Wheel Material	Diamond
Water Cooling System	Yes, integrated
User Interface	Color Touch Screen