This chapter describes the procedure for preparing lens edging using the tracer-centerer-blocker, before
calling the shape from the edger.
• Description of the edging preparation screen (F p.88)
• Edging settings (F p.90)
1. MENU SCREEN
Press > to access the edging preparation screen.
The screen changes according to the edger to which it is connected.
The following screen is displayed:
1. Lens material
◦ Plastic lens - index 1.5
&
◦ Polycarbonate lens
◦ Medium/High index plastic lens - index > 1.5
◦ Trivex lens
TM
◦ Glass lens
◦ Lens material to be defined on the edger
The configuration of the edging cycles depends on the type of material. An incorrect choice may result in
material damage.
To Next Page
Loading...
Need help?
General
