◦ + Centering - preparing edging
◦ + Preparing edging - centering
5. Warning message on import of a current Tess job (if the Tess connection is activated)
◦ Activated
◦ Deactivated
6. Boxing cross in the centering screen
◦ Displayed
◦ Not displayed
7. Lens blocking
Select the lens blocking mode:
◦ in the boxing center
◦ in the optical center
8. Zoom
◦ The work area is scale 1:1 by default in the centering screen.
◦ The work area is in zoom mode by default on the centering screen.
9. Activation or deactivation of Tess tracer connection
Connection deactivated by default
Once the change has been made, press to return to the work screen.
b. Decentration mode
This menu enables you to select a default input mode for decentration data.
To access this menu from your work screen, select > > .
The following screen is displayed:
To Next Page
Loading...
Need help?
General
