◦ Executive lens
◦ Mid-distance lens
5. Press to move to the next page
6. Press to go back to the first page
7. Edger(s) selection page
In automatic mode, the tracer detects the edger to which it is directly connected.
In manual mode, you can select the edger to which the tracer should connect.
Customizing the action bar
Press an option button several times to change its status in the tracing or centering screen:
• Option enabled: the option can be selected in the action bar drop-down menus.
• Option disabled: the option is no longer displayed in the action bar.
• Option circled in orange: the option is displayed and selected by default in the action bar.
Once the change has been made, press to return to the work screen.
d. Brightness
You can adjust the default brightness of the work area and/or the touch screen in order to improve your view
of the lens to be centered.
To access the brightness customization menu from your work screen, select > > .
The following screen is displayed:
1. Overview of the work area
To Next Page
Loading...
Need help?
General
