a. Working modes and display precision
This menu is used to customize the tracer-centerer-blocker to suit your work preferences:
• the working mode
• the display of the precision measurements,
• the zoom on the centering page,
• the blocking mode in the boxing center or optical center.
To access this menu from your work screen, select > > .
The following screen is displayed:
1. Pantoscopic tilt
a. Press on the tilt value to modify it.
> The numeric keypad is displayed.
b. Enter the angle (between -5° and +25°).
c. Press on to confirm.
2. Shape modification
Select the desired step for the shape modification.
3. PD and pupillary height
Select the desired step for input of the PD and pupillary height.
4. Working mode
Select the default working mode:
◦ + Tracing-tracing
◦ + Tracing - centering
To Next Page
Loading...
Need help?
General
