CONTENTS
INTRODUCTION 7
I. FIRST STEPS WITH NEKSIA 9
1. Descriptive diagrams 10
2. Connection to an edger 11
3. Using the tracer-centerer-blocker 12
a. Turn on and turn off the tracer-centerer-blocker 12
b. Using the touch screen and keypads 12
c. Work screen 14
II. TRACING 15
1. The tracing environment 16
a. Menu screen 16
b. Jobs and working modes 18
c. Displaying the binocular view 20
2. Shape management and storage 22
a. Menu screen 22
b. Job list 24
c. Creating a job 24
d. Working in current job mode (job A) 25
3. Tracing a rimmed frame 26
4. Tracing a high-base frame (option) 27
5. Tracing a pattern, demo lens or recut lens 30
a. Optical tracing (option) 30
b. Mechanical tracing 32
c. Inputting the curve and the frame base after monocular tracing 35
III. CENTERING 39
1. Centering environment 40
a. Menu screen 40
b. Call a shape (if the connection to Tess is activated) 42
c. Using the tripods 43
d. Centering modes 43
e. Centering help 44
2. Centering a single vision lens 44
3. Centering a progressive lens 47
a. Centering a progressive lens using re-marked micro-engravings 47
b. Centering a lens using manufacturer markings 50
4. Centering bifocal / trifocal lenses 52
5. Centering an executive lens 54
6. Centering a mid-distance lens 56
a. Centering a lens using re-marked micro-engravings 57
b. Centering a lens using manufacturer markings 59
7. Centering for a high-base frame 61
8. Blocking a lens 61
a. Preparing blocking 62
To Next Page
Loading...
Need help?
General
