c. Using the tripods
Lens centering requires the use of a tripod
&
.
Typical cases: if the standard tripod does not ensure an optimal stability of the lens, a recut lens tripod
&
equipped with adjustable studs is available.
STANDARD TRIPOD RECUT LENS TRIPOD
You can turn the tripod to move the studs if they obscure the markings when it comes to centering.
Using the recut lens tripod
You can adjust the spacing of the studs to ensure better lens stability.
WITH THE STANDARD TRIPOD WITH THE RECUT LENS TRIPOD
d. Centering modes
The centering modes available depend on the type of lens selected.
Always refer to the specific procedure for your type of lens.
To Next Page
Loading...
Need help?
General
