The following screen is displayed:
1. Screensaver display
Activate or deactivate the screensaver.
2. Triggering
Set the waiting time before the display of the screensaver (in seconds).
3. Transition
Set the transition time between each image (in seconds).
4. Adjusting the default brightness of the touch screen
Once the change has been made, press to return to the work screen.
2. CUSTOMIZE THE TRACER-CENTERER-BLOCKER,
This section will enable you to customize the tracer according to your requirements:
• Customising the working modes and display precision (F p.97)
• Choosing a decentration mode (F p.98)
• Customising the action bar (F p.99)
• Adjusting the brightness (F p.101)
To Next Page
Loading...
