b. Job list
The job list enables you to save jobs on a daily basis. It can store up to 1,000 jobs.
c. Creating a job
There are several ways of creating a job:
• Scan the barcode corresponding to the desired ID using the barcode reader (optional): the job is
saved to the job list.
• To create a job, use the alphanumeric keypad and follow the procedure below.
From the tracing screen, press in the action bar to create a new job.
The alphanumeric keypad is displayed.
For more information on entry and use of the keyboard, refer to the section First steps > Using
the tracer-centerer-blocker > Using the touchscreen and keypads (F p.12).
Press to enter the new job ID.
The ID is automatically allocated by the tracer-centerer-blocker (first free place in the selected list). You
can modify it: the ID can consist of alphanumeric characters.
Press to enter the reference of the new job.
The reference may consist of alphanumeric characters. It can contain the information of your
choice:
• Customer's name
• Frame brand or reference
• Manufacturer, etc.
Press on to confirm.
The tracing screen is displayed, the allocated ID appears in the information bar.
The tracer-centerer-blocker is ready for tracing. For further information, refer to the section concerning
your job type.
To Next Page
Loading...
Need help?
General
