1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
This chapter describes the lens shape modification procedures:
Description of the shape modification screen (p.85)
Modifying the lens shape (p.86)
Archiving shapes (p.90)
1. Menu screen
From the centering screen, press to access the shape modification screen.
The following screen is displayed:
Work area
Colours which may appear on screen:
(white) Current shape (from the shape traced) and associated drilling points
(cyan) Current shape (obtained by symmetry with the shape traced) and associated drilling points
(light red) Shape before modification
(grey) Part of the shape not selected for the modification underway
(purple) Smallest possible shape
(pink) Limit of the no-accessory area
(yellow) Limit of the drilling area
(red) Non-machinable shape
(blue) Reference drilling points
(green) Lens already blocked
Binocular view
Half PD and pupillary height
Active eye
The selected eye has an orange frame around it.
D-dimension modification
A-dimension modification
Modification of half A-dimensions (temporal / nasal)
B-dimension modification
Modification of half B-dimensions (upper / lower)
Modification of the overall size of the shape
Scaling in relation to boxing center
Shape rotation around the boxing center
To Next Page
Loading...
