5
4
3
2
1
1.
2.
3.
In tracing - centering mode, the centering screen is displayed at the end of the tracing:
Select then access the tracing screen.
Press to display the binocular view.
Position the frame in front of the screen, against the faceplate to check its shape and centering.
Press to return to the monocular screen.
Select then to go back to the centering screen.
Tracing - tracing mode
The tracing screen is displayed again once tracing is complete:
Press to display the binocular view.
> The binocular view is displayed.
Position the frame in front of the screen, against the faceplate to check its shape and centering.
Press to return to the monocular screen.
2. Shape management and storage
This section explains how to manage the available lists to store your shapes.
Description of the shape storage screen (p.22)
Job list and collection list (p.24)
Creating a job (p.24)
Working in current job mode (job A) (p.25)
a. Menu screen
From the tracing screen or the centering screen, press on the menu then to access the shape storage screen.
The binocular view is displayed.>
To Next Page
Loading...
