1.
2.
3.
4.
5.
6.
7.
8.
9.
Sort the jobs
ID
(p.148)
Reference
Date
Types of jobs:
Drilled
Asymmetric tracings
Creative shapes/engravings: creative shape, shape with engraving
Selected job
Shape preview
Select the eye to be displayed in the preview
In monocular tracing mode, the eye just traced is displayed by default.
Information concerning the lens shape and frame
A, B and D dimensions
Frame base
Curve angle
Material of the frame / pattern / demo lens or recut lens
Job counter for the selected list
Back to the default display of the selected list
Display all jobs starting with the selected letter
To display the all jobs starting with the selected letter:
Press once if it is in the first position on the button,
Press twice in succession if it is in the second position,
Press three times in succession if it is in the third position.
Example:
Press 3 times on the buttonto display all jobs starting with the letter R.
> The R goes into upper case: .
> The jobs starting with the letter R are displayed.
Select several jobs
Press to select several non-consecutive jobs in the list.
Example: Press on the button then select jobs #1, #5, #7.
To Next Page
Loading...
