5
4
3
2
1
Cancelling a modification
Press once on to cancel the last modification made to the shape.
Double-press on to go back to the original shape.
Once the shape has been modified, press to save and go back to the centering screen.
b. Free-form modification
This function enables you to freely modify the shape of the lens.
Modifying both eyes simultaneously
If you have done an asymmetric binocular tracing, you can modify both shapes simultaneously.
Modification of both eyes simultaneously
Modification of each eye separately
In symmetric monocular or binocular tracing, modifications are automatically made to both eyes.
Select .
Select the type of modification.
Modification focused on the center of the selected area.
Uniform modification across all points of the selected area.
Modification directed towards the two ends of the selected area.
Drag the cursors and to delimit the selection area.
Move the line starting at the boxing center to orient the modification.
Use the buttons or to reduce or enlarge the shape.
The selection area is delimited by two cursors and .
>
The area not affected by the modification is displayed in grey.>
The shape is modified.>
The original shape is displayed in light red.>
To Next Page
Loading...
