a. Centering a mid-distance lens using re-marked micro-engravings 71
b. Centering a mid-distance lens using manufacturer markings mode 72
c. Centering a mid-distance lens in manual mode 74
7. Centering a lens for a high-base frame 76
8. Markings database 77
a. Menu screen 77
b. Add a new marking 78
9. Blocking a lens 80
IV. MODIFYING THE LENS SHAPE 83
1. Menu screen 85
2. Modifying a shape 86
a. Enlarging, reducing or rotating a shape 86
b. Free-form modification 88
c. Retouching a shape 89
3. Archiving / saving a shape 90
V. PREPARING A DRILLED JOB 91
1. Legend screen 93
2. Configuring a drilling point 94
a. Creating a drilling point 96
b. Delete one drilling point 97
c. Dimensioning a drilling point 97
d. Adjusting the position of a drilling point 98
3. Drilling models 101
a. Importing a model 101
b. Saving a model 102
VI. PREPARING LENS EDGING 103
1. Menu screen 105
2. Edging settings 106
VII. TRACER-CENTERER-BLOCKER CONFIGURATION 109
1. Configure the tracer-centerer-blocker 111
a. Time, date and language 111
b. Connections 111
c. Screensaver 113
2. Customize the tracer 113
a. Working mode and measurement display 113
b. Decentration mode 115
c. Action bar 115
3. Restore the factory settings 118
VIII. MAINTENANCE & SERVICING 119
1. Carrying out the autotests 121
2. Checks and calibration 122
a. Checking and calibrating the tracing table 122
b. Checking and calibrating the centerer-blocker 124
c. Calibrating the touch screen 125
3. Make a backup of the jobs and the display configuration 127
4. “Remote control” Function 128
5. Statistics and technical log 131
a. Tracer cycles 131
b. Technical history and errors 131
To Next Page
Loading...
Need help?
General
