Estun pronet series - Setting Parameters

ProNet Series AC Servo User's Manual
- 115 -
4.8.1 Setting Parameters
Parameter Meaning
Pn005
H.□□3□
Control mode selection:
Speed control(contact reference) Speed control(zero reference)
Pn316
Internal set speed 1
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm 100 Immediately
Pn317
Internal set speed 2
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm 200 Immediately
Pn318
Internal set speed 3
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm 300 Immediately
Pn319
Internal set speed 4
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm -100 Immediately
Pn320
Internal set speed 5
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm -200 Immediately
Pn321
Internal set speed 6
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm -300 Immediately
Pn322
Internal set speed 7
Setting Range Setting Unit Factory Setting Setting Validation
-6000～6000 rpm 500 Immediately
(Note):The servomotor’s maximum speed will be used whenever a speed setting for the Pn316～Pn322 exceeds the
maximum speed.
s
p
eed
s
p
eed
s
p
eed
s
p
eed
s
p
eed
s
p
eed
s
p
eed