103
CV Surname description range value
179 braking function stopping time 1 Value can be subtracted from the 33% of CV 4, when the braking function
1 is active. See section 10.6.
0 - 255 80
180 braking function stopping time 2 Value can be subtracted from the 33% of CV 4, when the braking function
2 is active. See section 10.6.
0 - 255 40
181 braking function braking time 3 Value can be subtracted from the 33% of CV 4, when the braking function
3 is active. See section 10.6.
0 - 255 40
182 Brake function 1 max. speed Highest gear that can be achieved when one braking function active. 0-126 0
183 Brake function 2 max. speed Highest gear that can be achieved when braking function 2 active. 0-126126
184 brake function 3 max. speed Highest gear that can be achieved when braking function 3 active. 0-126126
246 Automatic uncoupling
Cruising speed
Speed at which the loco while decoupling. The larger the value, the faster the
locomotive. The value 0 switches the automatic coupler. Automatic decoupling is only
active when the functional onsausgang set to "Pulse" or "coupler".
0 - 255 0
247 Decoupling - Removing This value multiplied by 0.016 defines the time which drives off the locomotive when moving
away (automatic decoupling) from the train.
0 - 255 0
248 Decoupling - Pushing This value multiplied by 0.016 defines the time, which presses the locomotive when
pressed (automatic decoupling) to the train.
0 - 255 0
249 Minimum distance shot of steam Minimum distance between two bursts of steam, irrespective of sensor data. See. Chapter 13.3. 0 - 255 0
250 Secondary steam trigger defines the distance between two successive bursts of steam for the secondary steam
generator. The value indicates how much should be shorter distances per thousand the
bursts of steam of the secondary steam generator than those of the primary steam
generator. Is required for steam engines with two independent bogies, eg "Big Boy" or
"mallet".
0 - 255 0
253 Constant brake mode Determines the type of constant braking mode. Active only if CV 254> 0 0 - 255 0
function
CV 253 = 0: Decoder brakes linearly CV 253> 0:
Decoder constant linear brakes
254 Constant braking distance forward A value> 0 specifies a stopping distance which is maintained speed regardless of
the overall.
0 - 255 0
255 Constant braking distance backward Constant braking distance when driving backwards. Active if value> 0 ansons-, th the
value of CV 254 is used. Useful for turning trains
0 - 255 0
List of all supported CVs
To Next Page