92
Decoder Reset & Special Functions
15. Decoder Reset
You can always restore the factory settings of the decoder re.
15.1. With DCC systems or 6020/6021
Write this in the CV 08 the value 08th
15.2. With Märklin® systems (using mfx®)
mfx® decoder can be personalized with Central Station ® or Mobile Station® via
the in loco menu reset command to the factory settings.
15.3. With LokProgrammer
select "Reset decoder" in the "Programmer" option and follow the instructions on
the screen.
16. Special Functions
Sound decoders offer some unique special features that you may not know
about.
16.1. wrongdirection
The wrongdirection determines the behavior of the decoder in the transition from
analogue into a digital section (see FIG. 10.3). Would you like to set the Wrong-,
must CV124, bit 0 are set.
To Next Page
Loading...
