ES581.4 - User’s Guide 11
ETAS General Information
1.6 About This Manual
This manual describes the startup and technical data of the ES581.4 CAN Bus
Interface USB Module.
1.6.1 Structure
This manual consists of eight chapters and one index.
• Chapter 1: “General Information”
This introductory chapter provides you with information on basic safety
instructions, returning the product and recycling, and how to use this
manual.
• Chapter 2: “Hardware Description”
The “Hardware Description” chapter describes the features, functions,
areas of application, interfaces and indicators, and the block diagram of
the ES581.4 CAN Bus Interface USB Module.
• Chapter 3: “Getting Started”
The “Getting Started” chapter describes general preparatory steps for
installation and how to install the ES581.4 drivers on Windows. This chap-
ter describes also the USB and the CAN connection of the ES581.4.
• Chapter 4: “Troubleshooting”
The “Troubleshooting” chapter contains suggestions on how to rectify
any faults the ES581.4 may have.
• Chapter 5: “Technical Data”
The “Technical Data” chapter contains a summary of the pin assignments
and all technical data of the ES581.4 CAN Bus Interface USB Module.
• Chapter 6: “Cables and Accessories”
The “Cables and Accessories” chapter contains an overview of the avail-
able cables and accessories.
• Chapter 7: “Ordering Information”
The “Ordering Information” chapter contains the ordering information on
the available cables and accessories.
• Chapter 8: “ETAS Contact Addresses”
The final chapter, “ETAS Contact Addresses”, gives you information on
ETAS’ international sales and service locations.
1.6.2 Using this Manual
Representation of Information
All activities to be executed by the user are presented in what is referred to as a
“Use-Case” format i.e., the aim is defined in brief as a title and the relevant steps
necessary to achieve this aim are then listed. The information is displayed as fol-
lows:
Target definition:
Any introductory information...
To Next Page
Loading...
