ES581.4 - User’s Guide14
Hardware Description ETAS
• Runs under Windows 7, Windows 8 and Windows 10 (Plug & Play instal-
lation)
• Provides two CAN channels
• Supports Measurement and Calibration and Flash programming on differ-
ent CAN ports
• Multi-client access to the same CAN channel (max. four clients can access
the device; two clients per channel)
• Comes with a more robust housing
2.2.2 CAN Features
Important CAN functions of the ES581.4 are:
• ES581.4
CAN concept for different CAN buses
– CAN transceiver integrated into the ES581.4
– Galvanically isolated connection to the CAN network
• DSUB connector in accordance with “CAN in Automation” (CiA)
• Protocols (supported by INCA)
– CCP,
–XCP,
– KWP-on-CAN (ISO14230/ISO15765),
– UDS (ISO14229/ISO15765),
– CAN Monitoring, OBD-on-CAN and CAN output
• Protocols (supported by ODX-LINK)
– OBD-on-CAN (ISO15765-4)
• SAE J2534-1 Pass Thru Interface
– CAN
– ISO15765
• Monitoring without CAN bus influence
• Time synchronization
• Exact time stamp
– 500 ns timing resolution for one channel usage
– 13 μs timing resolution for two channel usage
For more technical data on the ES581.4 consult chapter 5 on page 31.
To Next Page
