ES581.4 - User’s Guide8
General Information ETAS
1.1.4 Intended Use
This product was developed and approved for automotive applications. For use
in other application areas, please contact your ETAS contact partner.
Requirements for Operation
The following requirements are necessary for safe operation of the module:
• Observe the notes for the ambient conditions (see chapter 5.1.2
on page 31).
• Ensure compliance with the connection and settings values (see chapter
5.3 on page 35).
• The USB/CAN ports shall not be connected to any hazardous voltage/
energy sources.
Opening the Module
Requirements for the technical State of the Product
The product is designed in accordance with state-of-the-art technology and rec-
ognized safety rules. The product may be operated only in a technically flawless
condition and according to the intended purpose and with regard to safety and
dangers as stated in the respective product documentation. If the product is not
used according to its intended purpose, the protection of the product may be
impaired.
Maintenance
The product is maintenance-free. Servicing will be done at ETAS only. After the
servicing is complete, if the same module has to be delivered, then the module
will be verified again for safety conformity.
Cleaning
For cleaning, use a clean and dry cloth.
Damage or destruction of module is possible!
Do not open or change the module housing!
Work on the module housing may only be performed by qualified
personnel.
To Next Page
Loading...
