ES581.4 - User’s Guide 35
ETAS Technical Data
General
• HSP V10.4.0
• ES581.4 USB driver
• J2534 driver
Supported Software Interfaces
ETAS Basic Open API (BOA) is supported.
Customers using their own application software can integrate the ES581.4 mod-
ule into their software via the BOA interface.
5.3 Electrical Data
5.3.1 Power Supply
5.3.2 CAN Interface (CAN1 and CAN2)
Operating the ES581.4 with older software versions is not possible.
Operating voltage 4.75 V to 5.25 V DC
Supply via the USB port (see chapter
5.2.1 on page 33)
Current consumption, typ. (operation) 100 mA at 5.0 V DC
CAN port 2 channels, software-configurable,
with DSUB 9 connector (according to
CiA standard)
CAN transceiver High-speed transceiver
(TI-ISO1050DUB)
Standard (V2.0a) or Extended Format
(V2.0b), ISO High-speed mode
Microcontroller 60 MHz operation;
100 DMIPS Performance
Baud rate (max.) 1 MBaud
Baud rate (supported) 50 kBaud, 83.3 kBaud, 100 kBaud,
125 kBaud, 250 kBaud, 500 kBaud,
666.666 kBaud, 800 kBaud, 1 MBaud
Electrical isolation Interface is galvanically isolated
To Next Page
Loading...
