ES581.4 - User’s Guide 7
ETAS General Information
1 General Information
The introductory chapter provides information about the basic safety notices,
product return and recycling, use of this manual, system requirements for oper-
ating the module, scope of supply and additional information.
1.1 Basic Safety Instructions
1.1.1 Identification of Safety Notices
The safety notices contained in this manual are identified with the danger symbol
shown below:
The safety notices shown below are used for this purpose. They provide notes to
extremely important information. Please read this information carefully.
1.1.2 General Safety Information
Please observe the Product Safety Notices ("ETAS Safety Notice") and the follow-
ing safety notices to avoid health issues or damage to the device.
ETAS GmbH does not assume any liability for damages resulting from improper
handling, unintended use or non-observance of the safety precautions.
1.1.3 Requirements for Users and Duties for Operators
The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Improper use or use by a
user without sufficient qualification can lead to damages or injuries to one's
health or damages to property.
General Safety at Work
The existing regulations for safety at work and accident prevention must be fol-
lowed.
indicates a possible danger with moderate risk of death or (serious)
injury, if not avoided.
identifies a hazard with low risk that could result in minor or medium
physical injuries or property damages if not avoided.
Carefully read the documentation that belongs to the product prior to the
startup.
To Next Page
Loading...
