U2836 Operation Manual Chapter 3 Introduction to [MEAS DISP]
16
be displayed.
COUNT OFF ON
COMP OFF ON
RESET COUNT
2) Press the soft key COUNT OFF ON to set the bin counter as ON or OFF.
3) Press the soft key COMP OFF ON to set the compare function as ON or OFF.
4) Press the soft key RESET COUNT, “Info: Sure clear bin counter?” will be
displayed in the help zone. Then the following soft keys will be displayed.
YES
NO
5) Press the soft key YES to reset all bin counts to 0.
6) Press the soft key NO to cancel the reset operation.
3.2.2 BIN
This zone shows the bin number of the limit list.
3.2.3 HIGH/LOW
This zone shows the high and the low limits of the limit list.
3.2.4 COUNT
This zone shows the count value of the current bin.
3.2.5 AUX
This zone shows the count value of the auxiliary bin.
3.2.6 OUT
This zone shows the count value of the out bin.
To Next Page
Loading...