EUCOL U2836 - Password; Save Type; Bus Mode

U2836 Operation Manual Chapter 4 System and FILE
32
4.1.6 PASSWORD
This zone is used to display the password –protection mode.
Operation steps for setting the password
1) Move the cursor to Password, the following soft keys will be displayed.
 OFF
This soft key is used to turn off the password protection mode.
 KEYLOCK
This soft key is used to protect unlock keyboard.
 Hold SYSTEM
This soft key is used to turn on the password protection function including file
protection and starting up password.
 Hold FILE
This soft key is used to protect user’s file.
 MODIFY
This soft key is used to modify the password. The operation steps are as
follows:
Press MODIFY to input a new password. After inputting, a prompt
information will appear on the screen to prompt you to confirm the new
password. Input the new password again till the modification finishes.
———————————————————————————————————————
Note: The default password is 123456.
———————————————————————————————————————
4.1.7 SAVE TYPE
Operation steps for setting the type of files
1) Move the cursor to SAVE TYPE
, the following soft keys will be displayed.
 CSV
 TXT
 GIF
 BMP
 PNG
2) Use above soft keys to select the type of files.
4.1.8 BUS MODE
This mode is used to select RS232C, USBTMC or USBCDC.
Operation steps for setting bus mode
1) Move the cursor to BUS MODE
, the following soft keys will be displayed.
 RS232C
 USBTMC